Star Trek - Type 11 Shuttle Replica Okudagrams
This is a set of replica Okudagrams I created for a Star Trek fan film. They represent the panels in the Type 11 shuttle that appeared in the film 'Star Trek: Insurrection'.
I used to exact colors used on the printed panels in the film and have then light-corrected them to simulate the backlit appearance they actually had on the set, which gives the panels a more desaturated look.
This was a pretty fun project searching for reference material as some of the panels were barely seen in the film, some were not actually seen at all in fact, I had to find reference material from behind-the-scenes photos.
All panels were created in Adobe Illustrator.
Navigation consoles from the front of the ship (The lower panels were recycled from the Runabout set)
Miscellaneous Panels from the center panels
Shuttle Status panels to either side of the navigation panels.
The Engineering Station panels on the port side of the shuttle.
The Science Station panels on the Starboard side of the shuttle.
Shuttle Status displays. These were custom panels that were not actually seen in the shuttle set, these are based on Runabout displays seen on Deep Space Nine.
The Rear LCARS panels used to control the environmental systems and transporter.